Quick Search
Visitors Counter
mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday347
mod_vvisit_counterYesterday500
mod_vvisit_counterThis week347
mod_vvisit_counterLast week3892
mod_vvisit_counterThis month10395
mod_vvisit_counterLast month13857
mod_vvisit_counterAll days188214

Online (20 minutes ago): 17
Your IP: 38.107.179.237
,
Today: พ.ค. 21, 2012

PostHeaderIcon E701-T

Products - Welding


According with GB/T 10045-2001 E500T-1
Corresponding with AWS A5.20 E70T-1
JIS Z3313 YFW-C50DR

Introduction: E70T-1 is a kind of lime-titania type CO2 gas-shielded flux-cored welding wire. It has excellent welding performance, soft and stable arc, fewer spatters, good slag detachability and beautiful appearance of weld. Suitable for downhand welding and flat fillet welding. It has high welding efficiency. The weld metal has been given toughening treatment by microelements, so it has excellent low temperature toughness, good crack-resistance and stable and reliable inherent quality.
Uses: Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.

Chemical Composition of Deposited Metal (%)(CO2Shielding Gas)

Chemical Composition
C
Mn
Si
S
P
Guarantee Value
≤0.18
≤1.75
≤0.90
≤0.030
≤0.030
General Result
0.06
1.32
0.48
0.010
0.017
Mechanical Properties of Deposited Metal
Test Item
σb(MPa)
σs(MPa)
δ5(%)
Akv1(J)
Guarantee Value
≥480
≥400
≥22
≥27(-20℃)
General Result
567
504
29
138
Reference Current (DC+)
Wire Diameter(mm)
φ1.2
φ1.4
φ1.6
Current Range(A)
Downhand Welding
120~300
150~400
180~450
Vertical Upward Welding and Overhead Position Welding
120~260
150~270
180~280
Vertical Downward Welding and Overhead Position Welding
200~300
220~300
250~300
Horizontal Welding
120~280
150~320
180~350
Instructions:
1.The oil stains and rust on the weldments should be cleared away.
2.When welding, the gas flow rate is generally 20
25L/min.
3.When welding with flux-cored welding wires, the extension elongation should be 15
25mm.
4.The humidity of the welding wire storerooms should be preserved below 60%.
5.It is not suitable for non-vacuum-packed welding wires to be stored for more than half a year, and it is not suitable for vacuum-packed welding wires to be stored for more than a year.